In this segment i will be explaining how to remove and replace the fuel filter for the Nissan 240sx. Fuel filter replacement is the same on each three generations of the Nissan 240sx. Replacing the fuel filter in general in any automotive car can help improve gas mileage and performance as in a clogged fuel filter can cause your vehicle to not run due to the lack of recommended fuel needed to have the vehicle operate. So lets begin. If you look at the Nissan 240sx from the front with the hood open and clear view of the engine bay, look to the left side of the engine next to the intake manifold. You will see a can like figure with two ports one on top and bottom with a rubber hone connected on each side and bolted to the strut tower. That there is your fuel filter. The purpose is basically to just filter gasoline that enters the fuel lines so the motor does not burn contaminated fuel which could damage the motor. To remove the filter is very easy. You first unscrew the clamps on the fuel lines from both the top and bottom of the filter which requires a phillips screwdriver. Then pull of the hoses carefully not damaging them and then slide off the fuel filter upward. Replacing the filter is just the reverse process of the removal process.
No comments:
Post a Comment