Light Bulb Replacement

Now I will explain how to remove the light bulb out of a S13 Nissan 240sx headlight. To remove the light bulb out, first you need to lift up the pop up headlights by either turning them on which would be pointless because then you will be removing a hot light bulb, or you can just push the switch right above the cruise control buttons and they will pop up. Now once the headlights are up, you will need a phillips screwdriver and a ratchet with a 10mm socket. Use the screwdriver and there will be four screws on each side of the first cover. Once all four are out, pull out the cover. Then there will be four 10mm screws, use the ratchet and socket to remove those and the metal plate on top will come off. You will have an easier access getting to the bulb. Now pull back the rubber seal and there will be a clip, push down on the clip and to the side and the bulb will fall out. Disconnect the wiring harness to the bulb and then repeat the process on the other side. Then reverse the process to have the new bulbs installed. Make sure that you align the metal plate and plastic cover so when the headlights go back down that everything is flush and straight.